T-Shirt Tactics

Everybody loves to wear T-shirts.  For some they are a wardrobe staple - for others they are only occasional wear.  Whatever their place is in your clothing needs, you have choices within the Sure-Fit Designs fitting and designing system as to how you approach this style of garment.

Typically, the T-shirt is relatively close fitting and does not have a bust dart and is sewn from a knit fabric.  The no-bust dart feature does present a problem for you full-busted women.  You all know you will always achieve a superior fit when your pattern has a bust dart.

The Sure-Fit Designs pattern kits provide either the darted bodice pattern from the Dress Kit, or the undarted pattern from the Shirt Kit.  Most of you already know that the Dress Kit bodice has 2 1/2" (6.4 cm) ease in the bust circumference, whereas the Shirt Kit has 5-6" (12.7 - 15.2 cm) ease in the chest circumference.

Which kit to use for your T-shirt?   Since the T-Shirt is usually undarted with a closer fit to the body, you'd use the Dress Kit bodice (with the bust dart).  If you use the Shirt Kit, you'll have a looser fit and a much deeper armscye.

Ah Ha!  In comes my new article, T-Shirt Tactics, where I offer an alternative which uses the Dress Kit bodice and I show you how to remove the dart!  The result offers a fit that is closer to your body, the armscye is not as deep as with the Shirt Kit, and this process generally provides an excellent T-shirt alternative.

Yes I know it doesn't have a bust dart anymore, so you full-busted ladies will inevitably end up with some folding in the armscye that points toward your bust.  And no doubt, the shirt will likely hike up somewhat in the front because your don't have that bust dart shaping your bustline.  But since you are going to be sewing with a forgiving knit fabric, usually these issues are minimized.  But at least, you have 3 great choices now to design your favorite T-shirt with the Sure-Fit Designs patterns.

• Dress Kit bodice with dart

• Shirt Kit pattern - no dart - deeper armscye

• Dress Kit bodice without dart

To download your copy of the T-Shirt Tactics article with instructions to remove the dart, please Click Here, then simply scroll toward the middle of the page where you'll see the link for the .pdf file.

Just for fun and for interest, I finished my T-shirt with a self-fabric 2 1/2" wide band at the hem level, scooped the neck edge 2" all the way around and then filled in with a 1 1/2" self-fabric band.  A small tab was inserted at CF while applying the neck band and finished with a decorative button.

And another great benefit is that it can be 'Made in a Day'!  It's just one more quick project for you.

Give it a try and send me your comments and photos.  When you send your photos, I'll put together a T-Shirt collage...and show off all of your work.  Please send photos to info@surefitdesigns.com.
Enjoy,
Glenda...the Good Stitch!

Read More

Squishy, Spongy, Stretchy!

Topstitching a fabric that is squishy, spongy and stretchy is no fun!  And on top of that, the fabric I was using was a leather-like stretch, which meant once the needle pierced the fabric, it left distinctive holes.  And on top of this, the fabric would not press flat, which made it very difficult when turning and pressing seams.  No second chances on this project!

Here's what the finished jacket looks like.

It's a Sure-Fit Designs knock-off of a jacket I saw in NYC.  Exposed zippers are ever so popular.

Mine of course, being all black, doesn't have quite the bizazz appeal like the black & white ready-to-wear, but it's still a stunning jacket.  And the SFD version does have a shoulder yoke - just not as deep in toward the armscye area.

This blog is going to focus only on the topstitching process and tips that I'd like to share with you if you ever come across this type of situation.  Since I knew I had one chance only to get it right, meaning evenly spaced, straight, no skipped stitches and no puckers, testing prior to the final topstitching was definitely required.

Yup!  This fabric is great to look at, but it sure did have it's challenges.  It just simply wouldn't feed well when the leathery side is face up.  I'd purchased both a solid black as well as a perforated patterned piece.  I got them both in the Stretch House during my NYC excursion.

I combined both these fabrics in this jacket.  With a traditional seam, if right sides were being sewn together, it wasn't a problem, but if you needed to topstitch...well - watch out!  It has kind of a leather-like look and a little bit of a sticky feel.

The feed dogs didn't like it.  The walking foot didn't help feed the under and upper layers equally.  Perhaps a roller foot would have worked, but since I didn't have that machine attachment another solution needed to be found.

After much testing, I settled on a paper-like tear-away stabilizer.  I had 3 different ones to test and ended up using this Sulky Tear-Away.  It's years old and I'm sure the price is more than  $1.99 now, but for this project, it worked the best.

What did I test before sewing the one and only chance I was going to get?
First, I recreated a seam scenario as close to what the finished jacket had - meaning the solid black fabric was on the underside of the lapel.  The perforated fabric was on the top side.
Then I tested:

• the best needle choice to prevent skipped stitches.  Of course, new is always preferable.
• stitch length - what would look the best on the finished edge.
• which stabilizer tore away the easiest without too much pulling and stress on the stitches.

This is just a photo of the test sample.  I did about 3 different swatches.

































After choosing the most appropriate stitch length, best needle and stabilizer, I prepared the stabilizer.  It had to be cut in the exact shape of the neck line curve so that I could lay it in place and see the folded edge of the seam.  I used the pattern's neck edge for this.

Then I took a deep breath, centered my thoughts and began topstitching.  Remember, I had only one chance at this - this fabric was so unforgiving that I couldn't pick it out if I happened to sew crooked.

 

Here's a close-up of the stitching before the stabilizer was torn away.

Next came tearing the stabilizer away.  Even this needed to be done with control - one side at a time for both the upper and under layers.

When it was all said and done, I was quite happy with the results, but I'd been agonizing over this final process for the last few days, knowing that it was one chance or the whole thing would be ruined.

Here's a close-up.

I am happy with the results.  Feel free to comment or add your opinions of how you would have tackled a similar challenge.  Also, watch for a new downloadable Fashion Leaflet describing how to modify your SFD bodice blueprint to achieve this jacket.  I hope to have that available for your soon.

Kindly,
Glenda...the Good Stitch!

P.S. Although this next jacket isn't quite the same (nor is it a Sure-Fit Designs jacket), when I saw it on Imogene Lamport from Inside Out Style - I thought it was so similar in design with the exposed zipper offset on one side, that I wanted to show it to you.  And what a difference it makes to sew it in white for a summery look...also notice the shorter hip length...more like the NYC jacket in white and black.

 

Read More

Knit Tip - Hems...Hmmmm

A beautifully prepared and finished hem enhances the look of any garment whether working with knits or woven fabric. In this blog, I'll focus on knit hemming techniques. But because a knit is by nature stretchy, sometimes achieving a nice, flat edge to hem can be challenging.

In a nutshell, here are some of your options:

• If the knit doesn't run, some can be left just as the cut edge.

• Some knits will do well with a serged/overlocked edge, turned up 1/4" and topstitched.

• A decorative (serged) rolled and stretched lettuce edge might be appropriate for some garments.

• Perhaps simply folded to the inside and bonded with a fusible web will work for some knits.

• Consider using a blind hem for more stable double knits.

• Some knits will require stabilizing first - particularly those where the cut edge tends to curl. Then once turned to the inside could be cover stitched - if you have a cover stitch machine option.

And though I don't (currently) have photos of all options, let's take a look...

This is a slinky-type jacquard knit. The drape is lovely, it has a beautiful hand and is a stable knit - meaning it does not run. Because the hem goes up and down and up and down, it would have made it challenging to sew even a narrow 1/4" turned hem.

The solution - leave the cut edge as is.

Here's a close-up of the cut edge. (I wish I'd bought more of this fabric in different colors - hind sight is always 20/20).













Next you'll see a much thinner knit where the edge is beginning to curl.

Some knits curl considerably more than this example.







And even though this next knit wasn't particularly 'curly', the fabric itself is quite thin and for a really nice hem, I stabilized it. I'll show you how

This is a 1 1/4" wide strip of iron-on fine, fusible interfacing which I fused to the inside of the hem edge.

If you don't have a pre-cut roll of fusible interfacing, you can cut your strips from yardage. This roll is pre-cut at 1 1/4" wide. I wanted a 1" wide hem, so I very carefully trimmed away 1/4".

Then press the 1" hem toward the wrong side.

I used the Cover Stitch option on my BabyLock Evolution. This is what the inside looks like.

I love this Cover Stitch option. As long as your hem is perfectly lined up, the result is 2 perfectly spaced rows of stitching...just like in ready-to-wear. And by having added the fusible interfacing at the edge of the hem, the fabric laid flat and stable throughout the stitching process.

The outcome was just what I intended it to be.




Kindly,

Glenda

P.S. The side of the hem hikes up slightly on the right side. This was intentional. I inserted shirring elastic on the right side seam only which results in a slight asymmetrical drape at the hem - all part of the plan!

Read More

Knit Tip - Where's the back of my pants??

Have you ever put your pants on backward and wondered why they felt so uncomfortable? I think we all have. When you sew them (knit pull-on pants), it's often difficult to distinguish front from back unless you stop to compare the crotch lengths.

This is a simple, decorative technique to help you quickly identify center back of your pants waistband.

Make sure waistband piece is cut the size that you need: 2 times the width of elastic plus seam allowances.
With short ends together, sew waistband in a circle creating the CB seam. Fold lengthwise with the seam to the inside and press a lengthwise crease indicating the top edge of the waistband.
Designate one side for the inside of the back of the pants. Stabilize the area to be stitched with tear-away stabilizer or iron on interfacing.

With waistband unfolded, stitch over the seam using a decorative stitch pattern in contrasting color.

Here's a short video talking about this simple knit tip.

Enjoy....
Glenda

Read More

Knit Tip - Joining Waist Elastic

This is a very simply tip to eliminate unnecessary bulk when sewing pull on pants with elastic in the waistband. Just follow these easy steps.

1. Cut a piece of muslin or stable cotton/poly blend fabric the width of your elastic by 3 inches. ie: If using 2" (5cm) wide elastic, cut stabilizing fabric 2" X 3". (5 x 8 cm).

2. Measure and cut your elastic to go around your waist. But make sure that is is cut exactly the measurement you need and test it to ensure that it will pull up comfortably over your hips yet not be too loose at the waist.

3. Make sure the elastic is cut with evenly squared edges.

4. Butt the edges of the elastic together. With the stabilizing fabric underneath, pin the elastic to the fabric, keeping ends of elastic as close together as possible.

5. Zig zag or straight stitch fabric to elastic keeping the edges of the elastic butted together in the middle of the fabric rectangle. Sew in a square shape and then reinforce by sewing an "X" in the middle of the square.



6. Trim off excess muslin about 1/4" from stitching.
The results are sturdy, lay flat and reduce bulk.

Here is also a very short instructional video showing you this simple process.

Blogger isn't letting me give you the video directly on this page, so here's a link to the video - takes less than 5 minutes to watch. Enjoy!

http://www.youtube.com/watch?v=RPRpjkFJ8PQ

I'm sure some of you already use this technique, but for some of you, this may be new. It's great - give it a try!


Kindly,


Glenda

Read More